不同迎角下脊形前体绕流数值模拟研究

脊形前体有较强的背风涡流场,不同的前体形状对前体涡流场和气动力有很大的影响。本文针对脊形前体飞行器大迎角湍流大分离流动计算的困难,采用IDDES混合湍流模型,以及与之匹配的非定常算法,研究了不同来流迎角下脊形前体的气动特性,以及背风涡非定常演化、破裂的细致流动结构。选取了不同脊形角,以及不同上、下高宽比的脊形前体进行计算。计算结果表明,在迎角较小时,随着迎角的增大,前体主涡会逐渐增强,在迎角较大时,前体主涡破裂;在相同迎角下,脊形角较小时,前体涡较强,涡升力也更大;对于相同脊形角的前体,当上半截面高宽比较小时,前体主涡强度较大,前体涡破裂临界迎角较小,即会提前破裂。     

Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

基于RANS/LES混合方法的分离流动模拟

飞行器在大迎角、快速俯仰机动时,流场中含有大尺度、非定常的涡结构,传统雷诺平均Navier-Stokes （RANS）模型不能准确模拟流场结构,根据国际上相关研究的发展趋势,需要采用混合RANS/大涡模拟（LES）模型来对复杂分离流动进行准确模拟。本文对基于分区混合与湍流尺度混合的双重RANS/LES混合计算模型进行发展与应用。通过典型简化模型的静、动态湍流大分离流动,测试和验证所采用的脱体涡模拟（DES）类方法,重点研究改进的延迟DES （IDDES）模型在动态问题应用中的正确性和有效性,并对所采用的数值模拟方法和相应的计算软件的可靠性、鲁棒性以及精度进行了考核验证。典型算例包括超声速圆柱底部流动、跨声速方腔流动、NACA0015机翼深失速分离涡模拟等。计算表明：发展的IDDES类混合计算模型可有效解决对数层不匹配的问题;对于定态非定常分离流动,DES、DDES、IDDES等模型计算结果差别不大,随着流动的非定常特性增强,IDDES模型的优势逐渐显现;对于动态非定常分离流动,则需要采用IDDES类模型。     

机械连接件中螺栓孔角裂纹应力强度因子数值计算(英文)

The three-dimensional finite element method is used to solve the problem of the quarter-elliptical comer crack of the bolt-hole in mechanical joints being subjected to remote tension. The square-root stress singularity around the corner crack front is simulated using the collapsed 20-node quarter point singular elements. The contact interaction between the bolt and the hole boundary is considered in the finite element analysis. The stress intensity factors （SIFs） along the crack front are evaluated by using the displacement correlation technique. The effects of the amount of clearance between the hole and the bolt on the SIFs are investigated. The numerical results indicate that the SIF for mode I decrease with the decreases in clearance, and in the cases of clearance being present, the corner crack is in a mix-mode, even if mode I loading is dominant.     

基于感测线圈和KPCA的电机轴承故障检测

在电机定子中嵌入感测线圈并结合核主元分析(KPCA)进行电机轴承的故障检测。8只线圈分别嵌入电机定子的前端和后端,通过分时复用形成6组反应电机状态的差动信号。针对6组感测信号与电机状态间的非线性特征,采用KPCA进行多变量分析。着重介绍分析了KPCA故障检测的算法、监测指标和步骤。最后,用机车变压器油泵电机为对象开展了试验研究,验证了所提电机轴承故障监测方法的有效性和正确性。     

空间天气模式集成可视化演示软件设计

空间天气模式集成是空间天气预报业务化的基础, 空间天气模式集成可视化演示软件系统是其中重要的研究内容之一. 空间天气模式种类繁多, 要素多样, 模型复杂, 且各模式可视化形式及方法具有差异性. 本文综合当前中国空间天气模式的特点, 构建了一套空间天气模式集成可视化演示系统. 该系统兼容性好、可扩展性高, 能够集成当前中国空间天气中大多数模式. 讨论了空间数据管理方法, 基于Visual C++ 软件平台和OpenGL可视化软件模块,以动态加载方式初步实现了多个空间天气模式的可视化集成.      

平板型MLHP温度波动研究

环路热管(Loop Heat Pipe,LHP)是一种靠蒸发器的毛细芯产生毛细力驱动回路运行,利用工质相变来传递热量的高效传热装置。研制了一套平板式蒸发器、风冷式冷凝器的小型环路热管(MLHP),MLHP的毛细芯为500目不锈钢丝网,工质为丙酮,蒸发器、冷凝器以及所有管路均由紫铜制成。主要研究了平板型MLHP在不同热负荷条件下的温度波动特性,并重点研究了倾角以及充灌量等对MLHP系统温度波动的影响,且给出相应的合理解释。实验结果表明,平板式MLHP在2~3W/cm2热流密度区间范围内容易发生温度波动。     

基于设计特征模型的加工特征映射技术

为了实现数控编程过程中能够自动确定加工区域,对基于特征设计系统构建产品模型的方法、产品信息模型、信息模型间的关联关系、飞机结构件加工特征定义分类、设计特征与加工特征间的内在关系进行了深入的研究,提出了基于设计特征模型映射加工特征的方法.该方法通过遍历特征设计树,判断特征间的关系,查询特征组成面信息,从而构建出特征属性邻接图,进而采用基于图匹配的特征识别方法得到加工特征,并提取加工特征信息.该方法压缩了图匹配空间,大大提高了特征识别的速度,应用此方法实现了飞机壁板类零件的特征识别.      

Electrochemical micromachining of microgroove arrays on phosphor bronze surface for improving the tribological performance

A high friction coefficient and a low wear rate of contacted surfaces are essential elements to friction pairs between the stator and the rotor in ultrasonic motors. It has been shown that surface textures have a significant effect on improving the tribological performance of friction pairs.In this paper, microgroove arrays are introduced to the stator surface for improving the tribological performance of friction pairs between the stator and the rotor in ultrasonic motors. Microgrooves were fabricated on a phosphor bronze surface by through-mask electrochemical micromachining(TMEMM). Parameters, namely, the electrolyte inlet pressure, applied voltage, pulse duty cycle,and frequency, were varied to investigate their influences on the dimensions and morphology of the microgrooves. Results showed that the width and depth of the microgrooves were strongly affected by the applied voltage and frequency, while the morphology of the microgrooves was dependent on the electrolyte inlet pressure and the pulse duty cycle. Compared with a smooth surface, the friction coefficient increased from 0.245 to 0.334 and less abrasion was obtained when a surface was textured with microgrooves of which the width and depth were 185.6 and 57.6 lm,respectively. Microgroove arrays might play an important role in enhancing the performance of ultrasonic motors.     

Determination of Failure Thresholds in Hybrid Navigation

A systematic approach for the determination of failure thresholds for hybrid navigation systems is described. Cost functions which reflect the importance assigned to the consequences of false and missed alarms are minimized. The false alarm probability is obtained as a function of the threshold magnitude by observing the statistical behavior of the instrument outputs in the normal operating mode. The missed alarm probability is obtained by determining the sensitivity of navigation error performance to instrument error sources. Two cost functions are considered. To illustrate this method, failure detection and identification (FDI) thresholds are determined for the Space Shuttle Approach and Landing Test flight.